Dell Vostro 220 (Late 2008) - Manual (Page 122)

122
System Board
2 Replace the screws that secure the system board to the chassis. Avoid
over-tightening the screws.
CAUTION:
Failure to replace and tighten all screws properly may not provide
adequate grounding of the system board and result in system failures.
3 Connect the chassis fan cable to the system board.
4 If the system board is being replaced with a new system board:
a Install the memory modules onto the system board (see "Replacing or
Adding a Memory Module" on page 104).
1 2