Dell PowerVault MD3000 - Manual (Page 4)

3 When prompted for input within 5 seconds, press <S> for the Service
Interface Menu.
NOTE:
The "S" must be capitalized. A lower-case "s" will not access the Service
Interface Menu.
4 When prompted for a password, use the password provided by Dell Technical
Support.
Upon successful login, the Service Interface Main Menu is displayed in the
terminal window.
5 At the prompt, press <3> and <Enter>.
6 When prompted if you want to reset your storage array password, press <Y>
and <Enter>.
7 Close HyperTerminal or MINICOM.
8 Remove password reset cable.
9 To set a new password, go to the Modular Disk Storage Manager software
under the Tools tab and click Set Or Change Password Link.
10 Leave the Current Password blank, enter the new password twice,
and click OK.
____________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerVault are trademarks of Dell Inc.; Microsoft,
Windows, Windows Server, and Windows Vista are either trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
52933A00.fm Page 12 Thursday, March 19, 2009 9:56 AM