Solving problems, Beep codes, Inspiron – Dell Inspiron 17 (N7010, Mid 2010) User Manual

Page 47

Advertising
background image

45

Solving Problems

This section provides troubleshooting

information for your computer. If you cannot

solve your problem using the following

guidelines, see “Using Support Tools” on

page 52 or “Contacting Dell” on page 74.

WARNING: Only trained service personnel
should remove the computer cover.
See the

Service Manual at

support.dell.com/manuals for advanced
service instructions.

Beep Codes

Your computer may emit a series of beeps

during start-up if there are errors or problems.

This series of beeps, called a beep code,

identifies a problem. Write down the beep code

and contact Dell (see “Contacting Dell” on

page 74).

NOTE: To replace parts, see the

Service

Manual at support.dell.com/manuals.

Beep Code Possible Problem
One

Possible system board failure —

BIOS ROM checksum failure

Two

No RAM detected
NOTE: If you installed or

replaced the memory module,

ensure that the memory module

is seated properly

Three

Possible system board failure —

Chipset error

Four

RAM read/write failure

Five

Real Time Clock failure

Six

Video card or chip failure

Seven

Processor failure

Eight

Display failure

INSPIRON

Advertising