Hardware troubleshooter – Dell Inspiron 17 (N7010, Mid 2010) User Manual

Page 57

Advertising
background image

55

Using Support Tools

No boot device available — No bootable

partition on hard drive, the hard drive cable is

loose, or no bootable device exists.

If the hard drive is your boot device, ensure

that the cables are connected and that the

drive is installed properly and partitioned as

a boot device.
Enter system setup and ensure that the boot

sequence information is correct (see the Dell

Technology Guide available on your hard

drive or at support.dell.com/manuals).

CAUTION - Hard Drive SELF MONITORING
SYSTEM has reported that a parameter has
exceeded its normal operating range. Dell
recommends that you back up your data
regularly. A parameter out of range may
or may not indicate a potential hard drive
problem
— S.M.A.R.T error, possible hard drive

failure. Contact Dell (see “Contacting Dell” on

page 74).

Hardware Troubleshooter

If a device is either not detected during

the operating system setup or is detected

but incorrectly configured, you can use the
Hardware Troubleshooter to resolve the

incompatibility.
To start the Hardware Troubleshooter:

Click

1.

Start

Help and Support.

Type

2.

hardware troubleshooter in

the search field and press <Enter> to start

the search.
In the search results, select the option that

3.

best describes the problem and follow the

remaining troubleshooting steps.

Advertising