Drive-panel inserts – Dell OptiPlex 320 User Manual
Page 95
Advertising
10.
Replace the computer cover (see
Replacing the Computer Cover
).
Drive-Panel Inserts
1.
Follow the procedures in
Before You Begin
.
2.
Remove the drive panel by sliding the drive release latch downward to open the panel. Then, remove the drive panel from the hinges.
3.
Find the drive-panel insert in front of the drive bay that you want to use.
4.
Gently press the release tab of the insert to remove it from the drive panel.
1 hard-drive data cable
2 hard-drive data connector on system board (SATA0 or SATA1)
3 power cable
1 drive panel
2 release tab
3 drive-panel insert
Advertising