Cd/dvd drive – Dell OptiPlex 320 User Manual
Page 98
4.
Attach the power and data cables to the floppy drive.
5.
Replace the drive panel by aligning its hinges and rotating it up until it snaps into place.
6.
Replace the computer cover (see
Replacing the Computer Cover
).
7.
Enter system setup and use the Diskette Drive option to enable your new floppy drive (see
Entering System Setup
).
8.
Verify that your computer works correctly by running the Dell Diagnostics (see
Dell Diagnostics
).
CD/DVD Drive
1 floppy drive
2 shoulder screws (4)
3 shoulder screw slots (2)
1 power cable
2 floppy-drive cable
3 floppy-drive connector (FLOPPY)
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.