Using the pin method – Dell V305 All In One Inkjet Printer User Manual
Page 18
Using USB Cable to Configure the Printer on a Wireless Network (recommended for most users)
.
Using the PIN Method
1. If you are using your printer with a new Dell computer: Connect the USB cable between the port on the back of the
printer and the port on the back of the computer. Go to
If you are using your printer with an existing computer: Go to the next step.
2. Ensure that your computer is on, and then insert the Drivers and Utilities CD.
3. From the Welcome screen, click Next.
4. Select I Agree to the terms of this license agreement, and then click Next.
5. From the Select Connection Type screen, select Wireless Connection, and then click Next.
6. Wait until the Configure Wireless screen appears.
7. Using an Internet browser, type in your router IP address and press Enter. Navigate to the WPS Webpage.
NOTE:
You may be prompted to enter your username and password. If you are not sure of the username and
password, contact your router manufacturer’s helpline or your Internet service provider.
8. On your printer operator panel, use the left or right arrow button to scroll to Setup, and then press the Select
button .
9. Use the left or right arrow button to scroll to Network Setup, and then press the Select button .
NOTE:
If your wireless network security is disabled, make sure to enable the security settings before proceeding
with WPS configuration. (Consult your wireless router manufacturer’s documentation.) If you do not enable your
wireless network security, configuring your printer using WPS may change your wireless network settings. You will
then be required to reconnect your computer to your router with your new wireless network settings.