Dell Vostro 5560 (Early 2013) - Manual (Page 18)

Installing the Camera
1. Align the camera to the base panel .
2. Connect the camera cable to the camera.
3. Install :
a) display bezel
b) battery
c) base cover
d) optical drive
4. Follow the procedures in After Working Inside Your Computer.
Removing the Input/Output (I/O) Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) optical drive
b) base cover
c) battery
3. Disconnect the I/O board cable from the system board.
4. Remove the screw that secures the I/O board to the computer and lift the I/O board from the computer.
Installing the Input/Output (I/O) Board
1. Place the I/O board in its slot and snap it in place.
2. Tighten the screws to secure the I/O board to the computer.
3. Connect the I/O cable to the system board.
4. Install:
a) battery
18