Installing the display assembly, Removing the system board – Dell Vostro 5560 (Early 2013) User Manual
Page 20
Advertising
Installing the Display Assembly
1.
Align the base panel of the computer to the display hinges.
2.
Install the screws that secure the display hinges to the system board.
3.
Connect the LVDS cable, antenna cables, and the camera cable to the connectors on the system board.
4.
Install :
a) battery
b) base cover
c) optical drive
5.
Follow the procedures in
After Working Inside Your Computer.
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove :
a) optical drive
b) base cover
c) battery
d) system fan
20
Advertising