Dell C7765DN MFP Color Laser Printer - Manual (Page 24)

2 Installation
24
Initial Settings Procedures Using Control Panel
This section describes the initial settings related to the Smart Card solution, and how
to set them on the machine’s control panel.
Authentication for entering the System Administration mode ......................................... 24
Check the system clock .............................................................................................................. 25
Set NTP Time Synchronization.................................................................................................. 25
Set Authentication......................................................................................................................... 26
Set Use of Smart Card.................................................................................................................. 28
Set Access Control........................................................................................................................ 29
Set Private Charge Print ............................................................................................................... 32
Authentication for entering the System Administration mode
1
Press the <Log In/Out> button.
<Log In/Out> button
2
Enter "admin" with the keyboard displayed.
This is the factory default ID.
When a passcode is required, select [Next]
and enter "1111" from the keyboard.
3
Select [Enter] on the touch screen.
4
Select [Tools].