Dell Inspiron 1320 (Mid 2009) - Manual (Page 43)

16. Remove the four screws that secure the system board to the computer base.
17. Lift the system board at an angle toward the side of the computer and out of the computer base.
18. Turn the system board over.
19. Remove the processor heat sink assembly (see Removing the Processor Heat Sink Assembly ).
20. Remove the processor (see Removing the Processor ).
Replacing the System Board
1. Replace the processor (see Replacing the Processor ).
2. Replace the processor heat sink assembly (see Replacing the Processor Heat Sink Assembly ).
3. Turn the system board over and place it on the computer base.
4. Replace the four screws that secure the system board to the computer base.
5. Connect the camera cable and the display cable to their respective connectors on the system board.
6. Replace the processor fan (see Replacing the Processor Fan ).
7. Replace the speakers (see Replacing the Speakers ).
8. Replace the Bluetooth card (see Replacing the Bluetooth Card ).
1 camera cable connector 2 display cable connector
1 system board