Installing the air tunnel – Dell Precision T7610 (Late 2013) User Manual

Page 23

Advertising
background image

4.

Press down on the release latch on the other side of the air tunnel module to release it from the chassis.

5.

Press down on the release latch on the air tunnel base and lift it upwards to remove it from the computer.

6.

Repeat the steps to remove the second air tunnel module from the computer.

Installing the Air Tunnel

NOTE: The air tunnel is an optional component and your computer may not ship with it.

1.

Install the air tunnel base inside the computer chassis.

2.

Mount the air tunnel module on the base and press downwards until it clicks into place.

3.

Install:
a. optical drive
b. left cover

4.

Follow the procedures in

After Working Inside Your Computer

.

23

Advertising