Installing the i/o panel and the usb 3.0 ports – Dell Precision T7610 (Late 2013) User Manual
Page 33
Advertising
6.
Slide the opposite edge of the I/O panel outward to disengage the I/O module from the chassis.
7.
Remove the screws that secure the USB 3.0 module to the I/O panel and remove it from the computer.
8.
Remove the screws that secure the I/O panel and remove it from the computer.
Installing the I/O Panel and the USB 3.0 Ports
1.
Place the USB 3.0 module of the I/O panel and install the screws to secure it in place.
2.
Place the I/O panel and install the screws to secure it in place.
3.
Re-seat the I/O panel assembly on the chassis and secure it to the chassis clips on both sides.
4.
Install the screws that secure the I/O panel to the chassis.
5.
Connect all the cables to the I/O panel.
33
Advertising