Installing the coin-cell battery, Removing the heatsink – Dell Precision T7610 (Late 2013) User Manual
Page 25
Advertising
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into the slot on the system board.
2.
Press the coin-cell battery downward until the release latch springs back into place and secures it.
3.
Install:
a. cover
b. air tunnel (if available)
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the left cover.
3.
Disconnect the heatsink fan cable from the system board.
4.
Remove the captive screws that secure the heatsink.
25
Advertising