Web interface installation and setup – Dell KVM 2321DS User Manual

Page 20

Advertising
background image

20

xxx

|

Installation

xxx

1

You will see the Main menu with eleven options. Select the option number
for Set Web Interface Ports to open the Web Interface Port
Configuration Menu
.

2

Select option 1 to set the port numbers. Type the port numbers you wish to
use for the HTTP port and the HTTPS port.

3

If the values are correct for your network, type <Y> and press the <Enter>
key.

4

At the local user station, input the target device names.

Mouse Acceleration

If you are experiencing slow mouse response during a remote video session,
deactivate mouse acceleration in the operating system of the target device and
adjust mouse acceleration on each target device to Slow or None.

Web Interface Installation and Setup

Once you have installed a new appliance, you can use the web interface to
configure unit parameters and launch video sessions.

Supported Browsers

The web interface supports the following browsers:

Microsoft Internet Explorer® version 6.x SP1 or later

Firefox version 2.0 or later

Launching the On-board Web Interface

To launch the web interface:

1

Open a web browser and type the IP address of the appliance using the local
Web interface.

Advertising