Dell KVM 2321DS - Manual (Page 79)

Using the Viewer xxx | xxx 79
Accessing Scan Mode from the RCS Software
Figure 4.10: RCS Software- Scanning Servers
To access the Scan mode in the RCS software:
1 In the Explorer, select the Remote Console Switches, Servers, Sites, or
Folders tab.
2 Select two or more servers in the Unit Selector pane by pressing the
<Shift> key.
-or-
Press the <Ctrl> key. The Scan Mode task button appears.
3 Click the Scan Mode task button. The Thumbnail Viewer window appears.
Thumbnail View Status Indicators
The green LED indicates that a server is currently being scanned. The red X
indicates that the last scan of the server was not successful. The scan may have