Dell KVM 2321DS - Manual (Page 21)

Installation xxx | xxx 21
NOTE: If you changed the default HTTP/HTTPS ports in the serial console and are
using an IPv4 address, use IP address format: https://<ipaddress>:<port#>, where
“port#” is the number you specified in the serial console. If you are using an IPv6
address, use format: https://[<ipaddress>]:<port#>, where “port#” is the number you
specified in the serial console. If you are using an IPv6 address, you must enclose the
address in square brackets.
2 The log in window opens. Type your username and password and click OK.
NOTE: The default username is Admin and the password has no entry.
3 The web interface opens and displays the Connections tab.
NOTE: To use the Web interface, Java Runtime Environment (JRE) version 1.6.0_11 or
higher must be installed on your computer. The KVM Switch will attempt to detect
Java on your PC. If Java is not installed, download it from http://www.java.com, then
associate the JNLP file with Java WebStart.
NOTE: Once you have logged in to the web interface, you will not have to log in again
when launching new sessions unless you have logged out or your session has exceed
the inactivity timeout specified by the administrator.