Dell Inspiron 2000 - Manual (Page 97)

support.dell.com Using the System Setup Program B-7


 
Parallel port When the option is Enabled, the Mode is Bi-directional,
the Base I/O address is 378h IRQ 7. When the option is set
to Disabled, the port is disabled and you can use its
assigned LPT resources for another device. If you change
the parallel port address or DMA channel, be careful not to
create a conflict with the address or DMA channel of the
infrared port.
Local bus IDE con-
troller Configures the integrated local-bus IDE adapter. Options are
Both (default), Disabled, Primary, or Secondary. If Both is
selected, you can access both the hard-disk drive and the
media bay device(s). If Primary is selected, only the hard-
disk drive is accessible. When Disabled, the media bay
device(s) and hard-disk drive are disabled.
Modem Options are Auto (the default) and Disabled. Setting to Auto
automatically configures the internal modem.
LAN Options are Auto (the default) and Disabled. Setting to Auto
automatically configures the integrated NIC.
"$% 
176/) 
 !$ 6
 '

&
 

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the
system Help.