Safety information, Caution, Supply usage – Dell B1163 Multifunction Mono Laser Printer User Manual

Page 15

Advertising
background image

Safety information

15

1. Introduction

8

Supply usage

Caution

Keep the power cable and the contact surface of the plug clean
from dust or water.

Otherwise, this could result in electric shock or fire.

Do not remove any covers or guards that are fastened with
screws.

Fuser units should only be repaired by a certified service
technician. Repair by non-certified technicians could result in
fire or electric shock.

The machine should only be repaired by a Dell service
technician.

Do not disassemble the toner cartridge.

Toner dust can be dangerous if inhaled or ingested.

Do not burn any of the supplies such as toner cartridge or fuser
unit.

This could cause an explosion or uncontrollable fire.

When storing supplies such as toner cartridges, keep them away
from children.

Toner dust can be dangerous if inhaled or ingested.

Using recycled supplies, such as toner, can cause damage to the
machine.

In case of damage due to the use of recycled supplies, a service
fee will be charged.

For supplies that contain toner dust (toner cartridge, waste toner
bottle, imaging unit, etc.) follow the instructions below.

When disposing of the supplies, follow the instructions for
disposal. Refer to the reseller for disposal instructions.

Do not wash the supplies.

Do not reuse the waste toner bottle.

If you do not follow the instructions above, it may cause machine
malfunction and environmental pollution. The warranty does not
cover damages caused by a user's carelessness.

When toner gets on your clothing, do not use hot water to wash
it.

Hot water sets toner into fabric. Use cold water.

When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.

Toner dust can be dangerous if inhaled or ingested.

Advertising