Step 5 in – Dell XPS 17 (L701X, Late 2010) User Manual
Page 28
Advertising
28
Hard Drive(s)
4 Remove the memory module(s) (see "Removing the Memory Module(s)"
5 Remove hard drive 1 and/or hard drive 2 from the computer base:
• Remove the four screws that secure the hard-drive assembly to the
computer base.
• Using the pull-tab, slide the hard-drive assembly to disconnect it from
the connector on the system board.
• Lift the hard-drive assembly out of the computer base.
Hard drive 1
Hard drive 2
1
pull-tab
2
hard-drive assembly
3
screws (4)
1
2
3
Advertising