Replacing the hard drive(s), 2 remove the new hard drive from its packaging, 3 place the hard-drive bracket on the hard drive – Dell XPS 17 (L701X, Late 2010) User Manual
Page 30: Step 5 in "replacing the hard drive(s)" on
Advertising
30
Hard Drive(s)
Replacing the Hard Drive(s)
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3 Place the hard-drive bracket on the hard drive.
4 Replace the four screws that secure the hard-drive bracket to the hard
drive.
5 Replace hard drive 1 and/or hard drive 2 in the computer base:
• Place the hard-drive assembly in the computer base.
• Using the pull-tab, slide the hard-drive assembly into the connector
on the system board.
• Replace the four screws that secure the hard-drive assembly to the
computer base.
6 Replace the memory module(s) (see "Replacing the Memory Module(s)"
1
hard drive
2
hard-drive bracket
3
screws (4)
1
2
3
Advertising