Replacing the power-button board – Dell XPS 17 (L701X, Late 2010) User Manual

Page 48

Advertising
background image

48

Power-Button Board

10 Remove the two screws that secure the power-button board to the

palm-rest assembly.

11 Lift the power-button board off the palm-rest assembly.

Replacing the Power-Button Board

1 Follow the instructions in "Before You Begin" on page 9.
2 Use the alignment post to place the power-button board on the palm-rest

assembly.

3 Replace the two screws that secure the power-button board to the

palm-rest assembly.

4 Slide the power-button board cable into the connector on the

power-button board and press down on the connector latch to secure the

cable.

5 Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"

on page 40).

6 Replace the optical drive (see "Replacing the Optical Drive" on page 34).

1

screws (2)

2

palm-rest assembly

3

power-button board

4

power-button board cable connector

1

2

4

3

Advertising