Dell PowerVault MD3820i - Manual (Page 68)

9. Review the Confirmation page, and click Finish to establish the replication relationship.
Figure 55. Synchronous Remote Replication Confirmation
Removing Replicated Pairs
Removing a Replicated pair breaks the relationship between the primary and secondary Virtual Disks.
Both Virtual Disks return to standard Virtual Disks status and no data is deleted. The replication
relationship cannot be resumed after the operation starts.
To remove a Replicated pair:
1. In the All Storage Arrays table, select the storage array with the asynchronous replication group from
which to remove the Replicated pair.
2. In the Asynchronous Replication Groups table, select the asynchronous replication group from
which to remove the Replicated pair.
3. Click Remove Replicated Pair.
The Remove Asynchronous Replication Group Member dialog is displayed.
Figure 56. Remove Remote Replication Group Member Dialog
68