Dell PowerVault MD3820i - Manual (Page 79)

To delete an asynchronous replication group :
1. In the All Storage Arrays table, select the storage array group from which an asynchronous
replication group has to be deleted.
2. In the Asynchronous Replication Groups table, select an asynchronous replication group to delete.
3. Click Delete.
The Delete Asynchronous Replication Group dialog box is displayed.
Figure 65. Delete Remote Replication Group Dialog
4. Select the confirmation check box.
5. Click OK.
The asynchronous replication group is removed from the Array Replication Groups table.
Removing Replicated Pairs
Removing a Replicated pair breaks the relationship between the primary and secondary Virtual Disks.
Both Virtual Disks return to standard Virtual Disks status and no data is deleted. The replication
relationship cannot be resumed after the operation starts.
To remove a Replicated pair:
1. In the All Storage Arrays table, select the storage array with the asynchronous replication group from
which to remove the Replicated pair.
2. In the Asynchronous Replication Groups table, select the asynchronous replication group from
which to remove the Replicated pair.
79