Installing the speaker, Removing the power-switch cable – Dell OptiPlex 9010 (Mid 2012) User Manual
Page 22
Advertising
Installing the Speaker
1.
Place the speaker at the appropriate location on the chassis rear.
2.
Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it.
3.
Connect the speaker cable to the system board.
4.
Install the:
a. drive cage
b. front bezel
c. cover
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Switch Cable
1.
Follow the procedures in
Before Working Inside Your Computer.
2.
Remove the:
a. cover
b. front bezel
c. drive cage
3.
Disconnect the power-switch cable from the system board.
22
Advertising