Capresso Coffeemaker User Manual

Page 2

Advertising
background image

A LA CARTE button. Push the button and change the
strength by turning the ROTARY DIAL (

XMILD

,

MILD

,

NORMAL

,

STRONG

,

XSTRONG

). Now push the ROTARY

DIAL. During grinding turn the Dial to set the cup size.

D) Changing the Grinder Fineness
Important:
You can only adjust the fineness during the
actual grinding process.
1. Open the bean container lid and turn the dial while grinding:

larger dots: coarser; smaller dots: finer.

2. For darker, oily beans, grind somewhat coarser. For lighter

beans, grind somewhat finer.

E) Using Hot Water (factory setting is 5 oz.)
Place a cup underneath the Hot Water Spout and turn the
SELECTOR SWITCH to the right.

WATER PORTION

. To stop

the hot water flow turn the SELECTOR SWITCH to the left.

F) Frothing and Steaming with the DUAL FROTHER PLUS
(Using the frothXpress PLUS system see section "N").
Important: All frother parts must be tightly connected and clean.
1. Cappuccino: One shot espresso plus ~4 oz. of steamed

and frothed milk. Metal frother sleeve DOWN.

2. Latte: One shot espresso plus ~4 to 5 oz. of steamed milk.

Metal frother sleeve UP.

3. If the red lights in the steam buttons are ON, immerse

the frother into a pitcher with milk and push the

PERMANENT STEAM button.

DRAW OFF STEAM

.

Steam pushes into the milk ( if the steam buttons are not

illuminated, see chapters 16.6 Operating Instructions).

a) Push the STEAM button to stop.

SELECT PRODUCT

.

To continue steaming push the STEAM button again.

b) After steaming you can immediately brew coffee.

Important: Knocking Noise during Frothing: The machine

pumps water droplets for steam. This is normal.

Please note: Skim and 1% milk will produce more froth

than 2% and regular milk.

To increase milk temperature, frother sleeve should be UP.

G) Cleaning the Frother
Should be done right after use, takes less than 15 sec.!
Place a large cup underneath the frother. Push the PERMANENT
STEAM
button. After 5 sec. push the button again to stop.

H) Programming
Factory Settings:
• 1-cup Espresso: 2 oz., strong
• 2-cup Espresso: 2 oz./cup, strong
• 1-cup Coffee: 5 oz., strong
• 2-cup Coffee: 5 oz./cup, strong
• All cup buttons are set to temperature HIGH.
• Hot Water: 5 oz.
• Steam Portion: 14 seconds
All other settings see chapter 5, Operating Instructions.

Advertising