Capresso Coffeemaker - Manual (Page 6)

N) Using the
frothXpress
PLUS System
This system siphons
milk and automatically
produces preprogram-
med amounts of hot
frothed or hot steamed
milk right into your cups,
never wasting any milk!
1. Disconnect the Dual-
Frother PLUS from
the steam nozzle.
2. Fill the milk container
with milk and
assemble milk con-
tainer (see above).
Attach the frothXpress to the steam nozzle. Attach the milk
container to the frothXpress (see above).
Important: Make sure all parts are connected tightly,
otherwise siphoning does not work.
3. Set the dial to the (–) minus sign (12 o’clock) of the frothing
range for cappuccino or to the (–) minus sign (6 o’clock)
of the steaming range for latte.
4. Place cup underneath the frother.
5. Make sure the red lights in the STEAM button are ON.
6. Push the STEAM PORTION button.The steam will create
hot frothed milk right in your cup and will stop after 14 sec.
Change the steaming time in programming or use the
PERMANENT STEAM button for more or less milk.
7. For hotter milk in either position move the dial more
towards the (+) plus symbols.
(The extra long hose lets you siphon milk from any carton
without using the special milk container.)
Tip: Use chocolate milk to make great Hot Chocolate!
O) Cleaning the frothXpress PLUS System
Should be done right after use, takes less than 30 seconds.
1. Store the milk container in the refrigerator and remove the
frothXpress from the steam nozzle.
2. Drop the hose and the frothXpress in a cup of hot water.
This will push out any milk residue and prevents milk from
hardening inside the system.
3. Place a cup underneath the steam nozzle and push the
STEAM button for three seconds.
4. Replace frothXpress system.
CAPRESSO CUSTOMER SERVICE: 1-800-220-5701
M-F 9AM - 9PM; Sat. 9AM - 5PM EST
FAX: 201-767-9684 [email protected]
1
2
3
frothXpress
Plus at-
tached
Milk
Container
Assembly
Frothing
range
Steaming
range
Steam only
no siphoning DIAL
+
+
_
_