Sharing and preemption considerations, Virtual media dialog box – Dell KVM 1081AD/ KVM 2161AD User Manual

Page 104

Advertising
background image

96

xxx

|

Video Viewer

xxx

The user (or user group to which the user belongs) must have permission to
establish virtual media sessions and/or reserved virtual media sessions to the
target device. See "Local User Account Settings" on page 75.

Only one virtual media session may be active to a target device at one time.

Sharing and Preemption Considerations

The KVM and virtual media sessions are separate; therefore, there are many
options for sharing, reserving, or preempting sessions. The Avocent management
software has the flexibility to accommodate the system needs.

For example, the KVM and virtual media sessions may be locked together. In
this mode, when a KVM session is disconnected, so is the associated virtual
media session. If the sessions are not locked together, the KVM session can be
closed but the virtual media session will remain active. This could be desirable if
a user is performing a time-intensive task using the virtual media session (such
as an operating system load), and wants to establish a KVM session with a
different target device to perform other functions while the operating system
load progresses.

Once a target device has an active virtual media session without an associated
active KVM session, two situations can occur - the original user (User A) can
reconnect or a different user (User B) can connect to that channel. You may set
an option in the Virtual Media dialog box (Reserved) that allows only the User
A to access that channel with a KVM session.

If User B is allowed to access that session (the Reserved option is not enabled),
User B could control the media that is being used in the virtual media session.
By using the Reserved option in a tiered environment, only User A could access
the lower switch and the KVM channel between the upper switch and lower
switch would be reserved for User A.

Virtual Media Dialog Box

The Virtual Media dialog box allows you to manage the mapping and
unmapping of virtual media. The dialog box displays all the physical drives on

Advertising
This manual is related to the following products: