Dell KVM 1081AD/ KVM 2161AD - Manual (Page 63)

Local OSCAR User Interface xxx | xxx 55
Click X or press Escape to exit the dialog box without disconnecting a
user.
Displaying Version Information and Upgrading Firmware
For troubleshooting and support, the OSCAR interface enables you to display
the version number of the switch firmware and any auxiliary devices connected
to the switch, as well as upgrade your firmware for optimum performance.
To display version information and upgrade firmware:
1 Activate the OSCAR interface and click Commands > Display Versions.
The top half of the box lists the subsystem version in the switch. The lower
half displays the current IP address, Mask, MAC, and EID.
2 If you want to upgrade the firmware, click Upgrade and then click OK to
open the download box. You will be prompted for an FTP or TFTP device
IP address and the related information.
3 Click Download. After the firmware is downloaded, the Upgrade dialog box
will appear.
4 Click the Upgrade button.
NOTE: The switch will reboot when the upgrade is complete.
To upgrade individual SIPs:
1 Click the SIP button to view individual SIP version information.
2 Select the SIP button to view and click the Version button.
3 Click the Load Firmware button.
4 Click OK to initiate the upgrade and return to the Status dialog box.
NOTE: During an upgrade, the SIP status indicator in the Main dialog box is yellow.
The SIPs are unavailable when an upgrade is in progress. When an upgrade is
initiated, any current connection to the device using the SIP is terminated.