Static/dhcp ip controlled by front panel button – Dell PowerEdge C410x User Manual
Page 78
Advertising
BMC Remote Management Console | 78
Static/DHCP IP Controlled by Front Panel Button
To switch from DHCP to static or vice versa:
Hold down the ID button for 5 seconds
While pressing the ID button, press and hold the power button for 5 seconds
Release the power button, and then the ID button
It will take ~30 seconds to change the configuration
The ID light will indicate which mode has been selected:
- Solid for 5 seconds indicates static IP
- Flashing for 5 seconds indicates DHCP
If the default IP address is changed, switching DHCP to static IP will change the IP address back to the
default.
The default IP address is 192.168.0.120
Advertising