Dell Vostro 220s (Late 2008) - Manual (Page 9)

Troubleshooting
9
Troubleshooting
Tools
Power Lights
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
The power button light located on the front of the computer illuminates and
blinks or remains solid to indicate different states:
• If the power light is blue and the computer is not responding, see "Beep
Codes" on page 10.
• If the power light is blinking blue, the computer is in standby mode. Press
a key on the keyboard, move the mouse, or press the power button to
resume normal operation.
• If the power light is off, the computer is either turned off or is not
receiving power.
–
Reseat the power cable into both the power connector on the back of
the computer and the electrical outlet.
– If the computer is plugged into a power strip, ensure that the power
strip is plugged into an electrical outlet and that the power strip is
turned on.
– Bypass power protection devices, power strips, and power extension
cables to verify that the computer turns on properly.
– Ensure that the electrical outlet is working by testing it with another
device, such as a lamp.
– Ensure that the main power cable and front panel cable are securely
connected to the system board (see "System Board Components" on
page 40).
• If the power light is blinking amber, the computer is receiving electrical
power, but an internal power problem may exist.