Installing the display panel, Removing the camera – Dell Latitude E7450/7450 (Late 2014) User Manual
Page 18
Advertising

Installing the Display Panel
1.
Connect the display assembly cable to its connector on the display panel.
2. Place the display panel to its original position on the display assembly.
3. Tighten the screws to secure the display panel to the display assembly.
4. Install:
a.
b.
After Working Inside Your computer
Removing the Camera
1.
Before Working Inside Your Computer
2. Remove .
a.
b.
c.
3. Perform the following steps as shown in the illustration:
a. Disconnect the camera cable from the module [1].
b. Lift and remove the camera from the display assembly [2].
18
Advertising