Dell Latitude E7450/7450 (Late 2014) - Manual (Page 34)

Installing the Power Connector
1. Insert the power connector in its slot.
2. Connect the power connector to the system board.
3. Tighten the screw that secures the power connector to the system board.
4. Install:
a. system board
b. system fan
c. speaker
d. I/O board
e. coincell battery
f. camera
g. display assembly
h. hinge cover
i. WLAN card
j. WWAN card
k. hard drive
l. palmrest
m. keyboard
n. keyboard trim
o. base cover
p. battery
5. Follow the procedures in After Working Inside Your computer .
34