Installing the front input/output (i/o) panel, Removing the speaker – Dell Precision T3600 (Mid 2012) User Manual
Page 32
Advertising
6.
Remove the screws which secure the front I/O panel to the chassis.
7.
Remove the front I/O panel from the chassis.
Installing the Front Input/Output (I/O) Panel
1.
Replace the front I/O panel in its slot.
2.
Tighten the screws securing the front I/O panel to the chassis
3.
Attach the cables to the I/O panel.
4.
Slide the USB 3.0 module in its slot.
5.
Tighten the screws securing the USB 3.0 module to the front I/O panel.
6.
Install:
a. front bezel
b. cover
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Speaker
1.
Follow the procedures in
Before Working On Your Computer
.
2.
Remove the cover.
3.
Disconnect the speaker cable from the system board.
32
Advertising