Dell Precision T3600 (Mid 2012) - Manual (Page 43)

Option Description
TPM Security Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: The option is disabled.
CPU XD Support Allows you to enable the Execute Disable mode of the processor.
Default Setting: Enable CPU XD Support
Computrace Allows you to activate or disable the optional Computrace software. The options are:
• Deactivate (Default Setting)
• Disable
• Activate
NOTE: The Activate and Disable options will permanently activate or disable the
feature and no further changes will be allowed.
Chassis Intrusion This option is disabled by default.
Admin Setup Lockout Allows you to prevent users from entering Setup when an administrator password is
set.
Default Setting: Disabled
Table 7. Power Management
Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after a AC power
loss. You can set the AC Recovery to:
• Power Off (Default Setting)
• Power On
• Last Power State
Auto On Time Allows you to set the time at which the computer must turn on automatically. The
options are:
• Disabled (Default Setting)
• Every Day
• Weekdays
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled (Default Setting)
• Enabled in S5 only
• Enabled in S4 and S5
Fan Control Override Controls the speed of the system fan. The default setting is set to Auto.
Wake on LAN This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting and
must be enabled in the operating system. This feature only works when the computer
is connected to AC power supply.
• Disabled - Does not allow the system to power on by special LAN signals when it
receives a wake-up signal from the LAN or wireless LAN.
• LAN Only - Allows the system to be powered on by special LAN signals.
43