Dell Precision T3600 (Mid 2012) - Manual (Page 40)

Table 3. System Configuration
Option Description
Integrated NIC Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled (Default Setting)
USB Controller Allows you to control the USB controller. The
options are:
• Enable USB Controller (Default Setting)
• Disable USB Mass Storage Dev
• Disable USB Controller
Serial Port Identifies and defines the serial port settings.
You can set the serial port to:
• Disabled
• Auto
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may
allocate resources even if the setting is
disabled.
SATA Operation Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI (Default Setting)
NOTE: SATA is configured to support
RAID mode.
USB Configuration Allows you to define the USB configuration.
The options are:
• Enable Boot Support
• Front USB Ports
• Rear USB Ports
• USB3 Ports
SMART Reporting This field controls if the hard drive errors for
the integrated drives are reported during
system startup. This technology is part of the
SMART (Self Monitoring Analysis and
Reporting Technology) specification.
40