Dell PowerEdge SC1430 User Manual

Page 22

Advertising
background image

22

About Your System

No boot device available

Faulty or missing optical/diskette
drive subsystem, hard drive, or hard-
drive subsystem, or no boot disk in
drive A.

Use a bootable diskette, CD, or hard
drive. If the problem persists, see
"Troubleshooting a Diskette Drive" on
page 105, "T
roubleshooting an Optical
Drive" on page 106, and
"Troubleshooting a Hard Drive" on
page 107. See "Using the System Setup
Program" on page 27 for information
about setting the order of boot devices.

No boot sector on hard

drive

Incorrect configuration settings in
System Setup program, or no
operating system on hard drive.

Check the hard-drive configuration
settings in the System Setup program.
See "Using the System Setup Program"
on page 27. If necessary
, install the
operating system on your hard drive. See
your operating system documentation.

No timer tick interrupt

Faulty system board.

See "Getting Help" on page 123.

Northbound merge error -

The following DIMM has

been disabled by BIOS:

DIMM x

The specified DIMM was unable to
establish a successful data link with
the memory controller.

See "Troubleshooting System Memory"
on page 103.

Not a boot diskette

No operating system on diskette.

Use a bootable diskette.

PCIe Degraded Link Width

Error: Embedded

Bus#

nn

/Dev#

nn

/Func

n

Expected Link Width is

n

Actual Link Width is

n

Faulty or improperly installed PCIe
card in the specified slot.

Reseat the PCIe card in the specified
slot number. See "Expansion Cards" on
page 70. If the problem persists, see
"Getting Help" on page 123.

PCIe Degraded Link Width

Error: Slot

n

Expected Link Width is

n

Actual Link Width is

n

Faulty or improperly installed PCIe
card in the specified slot.

Reseat the PCIe card in the specified
slot number. See "Expansion Cards" on
page 70. If the problem persists, see
"Getting Help" on page 123.

PCIe Training Error:

Embedded

Bus#

nn

/Dev#

nn

/Funcn

PCIe Training Error:

Slot

n

Faulty or improperly installed PCIe
card in the specified slot.

Reseat the PCIe card in the specified
slot number. See "Expansion Cards" on
page 70. If the problem persists, see
"Getting Help" on page 123.

Table 1-6.

System Messages (continued)

Message

Causes

Corrective Actions

book.book Page 22 Monday, June 5, 2006 1:51 PM

Advertising