Replacing the battery latch assembly – Dell Studio 1555 (Early 2009) User Manual
Page 29
Advertising
Replacing the Battery Latch Assembly
1.
Slide the battery latch assembly into place.
2.
Replace and tighten the screw securing the battery latch to the battery release latch.
3.
Using a small screwdriver, place the spring over the hook on the computer base.
4.
Removing the Battery Latch Assembly
in the reverse order.
Back to Contents Page
CAUTION:
Ensure the battery latch assembly is properly oriented. The indent for the screw should face up when installing the assembly.
Advertising