Dell Studio 1555 (Early 2009) User Manual
Page 31
module and reinstall it.
3.
Replace the base cover (see
Replacing the Base Cover
).
4.
Slide the battery into the battery bay until it clicks into place, or connect the AC adapter to your computer and an electrical outlet.
5.
Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
®
Help and Support®
Dell System Information.
Back to Contents Page
NOTE:
If the memory module is not installed properly, the computer may not boot.
1
tab
2
notch
CAUTION:
If the base cover is difficult to close, remove the module and reinstall it. Forcing the base cover to close may damage your computer.