Display assembly – Dell Latitude D800 User Manual
Page 12
Back to Contents Page
Display Assembly
Dell™ Latitude™ D800 Service Manual
Display Assembly
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer over and remove the two M2.5 x 12-mm screws labeled "D" on the bottom of the computer.
3.
Turn over the computer and open the display.
4.
Remove the
central control cover
.
5.
Disconnect the display cable using the pull-tab, and release the cable from the four cable-routing clips.
6.
Lift the display out of the computer.
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
You must remove the display assembly before you remove the palm rest.
NOTE:
When you replace the display assembly, ensure that you route the display cable under the EMI clip and cable-routing clips.