Dell Latitude D800 - Manual (Page 26)

Back to Contents Page
Palm Rest
Dell™ Latitude™ D800 Service Manual
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the keyboard .
3. Remove the display assembly .
4. Remove the microprocessor thermal-cooling assembly .
5. Remove the video card .
6. Remove the 13 M2.5 x 12-mm screws from the bottom of the computer.
7. Remove the two M2.5 x 4-mm screws from the top of the palm rest.
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: You must remove the display assembly before you remove the palm rest; the display hinges pass through the back of the palm rest.
1 M2.5 x 12-mm screws (13) 303ED