Keyboard – Dell Latitude D800 User Manual
Page 20
Back to Contents Page
Keyboard
Dell™ Latitude™ D800 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer right-side up and open it.
3.
Remove the center control cover:
a.
Open the display all the way (180 degrees) so that it lies flat against your work surface.
b.
Starting on the left side of the computer, use a plastic scribe or flat-blade screw driver to pry up the center control cover.
c.
Disconnect the center-control-cover flex cable from the system board connector using the pull-tab.
d.
Lift the center control cover away from the computer, and lay it aside.
CAUTION:
Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 display
2 center control cover 7T982
3 computer base