Dell S520 Projector - Manual (Page 111)

Troubleshooting Your Projector 111
DoUSB not displaying
• Windows
Display over USB Should run
automatically. To manually run USB
display, go to My Computer and run
"USB_Display.exe".
• MAC
a Go to CDROM: USB_DISPLAY and run
"MAC_USB_Display.pkg".
b Follow the on-screen instruction to
complete installed.
c Reboot system, and then re-connect
USB cable to the computer and the
projector.
NOTE: You may require
administrator level access to install
the driver. Contact your network
administrator for support.
Problem (continued) Possible Solution (continued)