Dell S520 Projector - Manual (Page 44)

44 Using Your Projector
h [email protected]/24 Hz Top and Bottom
P
ROJECTOR
S
ETTINGS
— Select and press to activate projector settings.
The projector settings menu provides the following options:
A UTO S OURCE —Select Off (the default) to lock the current input signal.
If you press the Source button when the Auto Source mode is set to
Off, you can manually select the input signal. Select On to auto detect
the available input signals. If you press the Source button when the
projector is on, it automatically finds the next available input signal.
P ROJECTOR M ODE —Allows you to select the projector mode,
depending upon how the projector is mounted.
•Rear Projection-Wall Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen
with a wall-mounted projection (for regular projection).
•Front Projection-Wall Mount — The projector turns the image upside
down for wall-mounted projection.
C LOSED C APTION —Select On to enable close caption and activate the
closed caption menu. Select appropriate closed caption options: CC1,
CC2, CC3, and CC4.
NOTE:
1 Closed caption option is available for NTSC only.
2 Closed captioning can only be enabled via S-Video and
Composite Video inputs.
S TARTUP S CREEN —Default is Dell logo as wallpaper. You can also select
Capture Screen option to capture the screen display. The following
message appears on the screen.