Dell S300 Projector - Manual (Page 37)

Using Your Projector 37
• Original — Select Original to maintain the aspect ratio of image projected
according to input source.
• 4:3 — The input source scales to fit the screen and projects a 4:3 image.
• Wide — The input source scales to fit the width of the screen to project a
wide screen image.
Z OOM —Press to activate Zoom menu.
Select the area to zoom and press to view zoomed image.
Adjust the image scale by pressing or and
press to view.
Z OOM N AVIGATION —Press to activate Zoom Navigation
menu.
Use to navigate projection screen.
H ORIZONTAL P OSITION —Press to move the image to the left and to move the
image to the right.
V
ERTICAL P OSITION —Press to move the image down and to move the image
up.
F
REQUENCY —Allows you to change the display data clock frequency to match the
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
T
RACKING —Synchronize the phase of the display signal with the graphic card. If you
experience an unstable or flickering image, use Tracking to correct it. This is a fine
adjustment.