Installing the front bezel, Removing the expansion card – Dell OptiPlex 7010 (Mid 2012) User Manual
Page 12
Advertising
Installing The Front Bezel
1.
Insert the hooks along the bottom edge of the front panel into the slots on the chassis.
2.
Rotate the bezel toward the computer to engage the four front panel retention clips until they click into place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing The Expansion Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Lift the release tab on the card-retention latch upward.
12
Advertising