Installing the power switch, Removing the input/output panel – Dell OptiPlex 7010 (Mid 2012) User Manual
Page 34
Advertising
Installing The Power Switch
1.
Slide the power-switch cable in through the front of the computer.
2.
Secure the power-switch cable to the chassis.
3.
Connect the power-switch cable to the system board.
4.
Install the front bezel.
5.
Install the cover.
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing The Input/Output Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
a. cover
b. front bezel
c. hard drive
d. optical drive
3.
Disconnect the 24–pin connector from the system board.
34
Advertising