Display bezel – Dell Inspiron XPS User Manual
Page 12
Display Bezel
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
.
3.
Remove the six rubber display bumpers and two screw covers.
4.
Remove the six M2.5 x 6-mm screws and two M2.5 x 6-mm shoulder screws and remove the display bezel.
1 M2.5 x 6-mm screws (6)
5 display bezel
2 rubber display bumpers (6)
6 display panel
3 M2.5 x 6-mm shoulder screws (2) 7 display base
4 screw covers (2)
8 M2.5 x 3-mm screws (8)
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.