Dell Studio XPS 435 MT (Late 2008) - Manual (Page 27)

Back to Contents Page
Replacing the Rubber Foot
Dell Studio XPS™ 435MT Service Manual
1. Follow the procedures in Before You Begin .
2. Lay your computer on its side.
3. Pull the rubber foot until it comes free.
4. To replace the rubber foot, align and insert the rubber foot into the rubber foot slot at the bottom of the computer.
5. Press the rubber foot pin into the rubber foot to secure the rubber foot to the chassis.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the cover.
1 rubber foot pin 2 rubber foot
3 rubber foot slot