Dell Studio XPS 435 MT (Late 2008) User Manual
Page 29
Advertising
10.
Replace the eight screws that secure the system board to the chassis.
11.
Connect the cables that you removed from the system board.
12.
Replace the memory modules (see
Replacing Memory Module(s)
).
13.
Replace the processor (see
Replacing the Processor
).
14.
Replace any expansion cards on the system board (see
Installing a PCI Express Card
).
15.
Replace the computer cover (see
Replacing the Computer Cover
).
16.
Connect your computer and devices to electrical outlets, and turn them on.
17.
Flash the system BIOS, as needed.
Back to Contents Page
CAUTION:
Ensure that the heat sink assembly is correctly seated and secure.
NOTE:
For information on flashing the system BIOS, see
Flashing the BIOS
.
Advertising